Modify Selection
- Research methods and measures:
- Measures
- or
- Accidents
- or
- Fatalities
- or
- Sound power level
- or
- Temperature
- or
- Costs
- or
- Workers' compensation costs
- or
- Sound level
- or
- Injuries
- or
- Rates
- or
- Injury rates
- or
- Fatality rates
- or
- Non-fatal days lost rates
- or
- Occupational illnesses
- or
- Electrical measures
- or
- Voltage
- or
- Conductance
- or
- Electrical resistance
- or
- Absorption
- or
- Explosive limits
- or
- Mechanical strain
- or
- Airflow
- or
- Mechanical stress
- or
- Exposure limits
- or
- Permissible exposure limits
- or
- Recommended exposure limits
- or
- Particulate matter measures
- or
- Organic carbon fraction
- or
- Total dust level
- or
- Elemental carbon fraction
- or
- Respirable dust level
- or
- Particle count
- or
- Total carbon
- or
- Particle size distribution
- or
- Transmittance
- or
- Humidity
- or
- Pressure
- or
- Flammability
- or
- Ground stability
- or
- Convergence
- or
- Cleat
- or
- Roof quality
- or
- Slope stability
- or
- Horizontal stress
- or
- Weak rock
- or
- Dose
Home Links
Results 41 - 50 of 514
-
2/1/2007 - Peer reviewed journal articlesThis paper describes three mechanical methods - the mobile manipulator, the in-mine hoist, and a cable-handling system - developed by NIOSH to reduce injuries related to handling supplies or material, loading and unloading, and moving power cables.
-
2/1/2007 - Peer reviewed journal articlesTo evaluate how elemental carbon (EC), a surrogate of diesel particulate matter (DPM), predicts DPM, measurements of total carbon (TC) and EC were taken away from potential interferences in four underground metal/nonmetal mines during production.
-
12/1/2006 - Conference papersThis paper presents a method using a ray-tracing technique to determine absorption coefficients for underground mines. Absorption coefficients are determined and presented for octave bands from 63 Hz to 8 kHz.
-
9/1/2006 - Peer reviewed journal articlesThere are potential detrimental effects of capacitance charging currents during line-to-ground faults in mine power distribution systems. A representative mine power system is modeled, and simulations with faults at various locations are conducted.
-
11/1/2005 - Peer reviewed journal articlesNormal Accident Theory is a classic argument in organizational sociology, although it has been criticized as having imprecise definitions and lacking criteria for quantifying complexity. These limitations are addressed by a unique approach.
-
2/1/2005 - Conference papersHighwall stability remains a major concern during highwall mining. Geologic structure (hillseams) and pillar stability are the two major factors affecting highwall stability.
-
12/1/2004 - Peer reviewed journal articlesA commercial version of the BOM impactor, called the DPM Cassette, was recently introduced by SKC®. Tests were conducted to evaluate the performance of the DPM Cassette for measuring diesel-source elemental carbon in the presence of coal dust.
-
11/1/2004 - Information CircularsThis report analyzes mine fires for all U.S. underground and surface metal/nonmetal mining categories during 1990-2001 by state and six successive 2-year time periods.
-
8/1/2004 - Conference papersThis article discusses highwall stability, reasons for early pull out of highwall miner holes, and geotechnical engineering and planning factors, as well as operating practices to improve highwall stability and minimize the risk of a trapped miner.
-
8/1/2004 - Conference papersThis paper focuses on a computer simulation used to model roof behavior and rock bolt interaction in a collaborative study of ground behavior, reinforcement performance, and stress redistribution in a coal mine entry under severe horizontal stress.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program